Description
Single component enamel ALURON AT.
Scope and specifics of application
Aluronat enamel is used to paint pre-primed surfaces in order to form highly decorative finishing coatings.
It is designed to coat metal surfaces in the reduced drying mode, including assembly painting. Suitable for repair work. It is used for anti-corrosion protection and repair painting of internal and external surfaces of vehicles (agricultural machinery, construction equipment, public transport, railway transport), machine parts and mechanisms, construction metal structures surfaces, assembly lines, hangars, roofs as well as other metal products exposed to increased mechanical and atmospheric impacts.
Information on the material resistance to various media is available on request.
Main fields of application: power engineering, mechanical engineering, railway transport facilities.
Instruction for use
The surface to be coated must be primed. The basis ready to be coated must be free from dust, grease and other contaminants.
Conditions
Relative air humidity no more 80%.
The process of applying
Preparation |
Ready to use. Stir thoroughly before use with mixer. Thin if needed with formula thinner RP-1K, RP-1K F. |
Air spraying |
Operational viscosity: 18-25 s Thinning: RP-1К Nozzle diameter:1,6-1,8 mm Initial pressure: 0,3-0,4 atm |
Cross linking at 200С |
30 min
|
Thinner |
Formula thinner RP-1K, RP-1K F. |
Cleaner |
Formula thinner RP-1K, RP-1K F. |
Finishing |
Tubing, pistol and other spraying tools must be cleaned after using. |
Cleaning |
Wash the tools after using immediately. The frequency of washing depends on the amount of sprayed material, the temperature and the time since the shutdown, including any time lag. |