Primer EPPEX ST купить у производителя — RAUM-PROFIE
RAUM-PROFIE | Industrial coatings
ABOUT COMPANY
  • About company
  • CEO Message
  • Partners
Products
  • ALURON
  • Polytex
  • EPPEX
  • Related materials
INDUSTRIES
  • Oil and gas sector
  • Capacitive equipment
  • Engineering
  • Protective
  • Chemical industry
  • Transport construction
  • Power Engineering
  • The objects of railway transport
CONTACTS
Ещё
    Задать вопрос
    SalesDepartment: +7 (4932) 773-503
    Callback
    Ivanovo, 23rd Line str. 13
    • Вконтакте
    RU
    0 Sales Department +7 (4932) 773-503
    RAUM-PROFIE | Industrial coatings
    ABOUT COMPANY
    • About company
    • CEO Message
    • Partners
    Products
    • ALURON
    • Polytex
    • EPPEX
    • Related materials
    INDUSTRIES
    • Oil and gas sector
    • Capacitive equipment
    • Engineering
    • Protective
    • Chemical industry
    • Transport construction
    • Power Engineering
    • The objects of railway transport
    CONTACTS
      RAUM-PROFIE | Industrial coatings
      +7 (4932) 773-503
      • ABOUT COMPANY
        • Back
        • ABOUT COMPANY
        • About company
        • CEO Message
        • Partners
      • Products
        • Back
        • Products
        • ALURON
        • Polytex
        • EPPEX
        • Related materials
      • INDUSTRIES
        • Back
        • INDUSTRIES
        • Oil and gas sector
        • Capacitive equipment
        • Engineering
        • Protective
        • Chemical industry
        • Transport construction
        • Power Engineering
        • The objects of railway transport
      • CONTACTS
      • SalesDepartment: +7 (4932) 773-503
      Ivanovo, 23rd Line str. 13

      Primer EPPEX ST

      Compare

      The EPPEX ST primer is a classic epoxy primer based on zinc phosphate pigments with a sufficiently long drying time, but excellent physical and mechanical properties and high anticorrosive efficiency.

      Main fields of application:

      • oil and gas sector;
      • transport construction;
      • power engineering.
      more details
      • Primer EPPEX ST
      • description
      • characteristics
      • documentation
      description
      TU 20.30.22-002-69372620-2020

      Description

      Two component epoxy corrosion-proof primer for steel and concrete surfaces.

      Scope and specifics of application

      The EPPEX ST primer is a classic epoxy primer based on zinc phosphate pigments with a sufficiently long drying time, but excellent physical and mechanical properties and high anticorrosive efficiency. It is suitable both for anticorrosive treatment of new metal structures and for carrying out repair work. Thick-layer application is possible in single run. The material can also be used as a primer layer for anticorrosive coatings of concrete surfaces.

      It is used as a primer or intermediate coating for epoxy and polyurethane-based coating materials in complex protection systems, as well as an independent coating used inside premises or under a canopy.

      Due to its high chemical resistance, hardness and resistance to abrasive wear, the primer is ideal for carrying out anti-corrosion work on diverse industrial facilities. It is used for painting the internal surfaces of tanks for storing process water, dark petroleum products and mineral fertilizers as well as for protecting steel surfaces, including for painting bridges, vehicles, cranes, steel masts, conveyors and other steel structures.

      Information on the resistance of the material to various media is available on request.

      Main fields of application: oil and gas sector, power, mechanical engineering, transport construction.

      Instruction for use

      Metal surface should be abrasive blasted to grade 1 or 2 due to GOST 9.402 (Sa 2,5 or Sa 2 to ISO 8501-1:2007). Cleaned surface must be free of dust and grease.

      If the quality of surface preparation decreases, the service life and its operating performance may change.


      Conditions

      Two component epoxy primer EPPEX F is applied on the surface at the air temperature from +50С to +350С and  relative humidity  no more 80%. Surface temperature should be 30 higher than dew point.

      The process of applying

      Blending
      The product is two component. Component А is a dispersion of pigments and anticorrosion filler in epoxy resin.  Component B is a hardener solution. Mix the contents of the containers in the supplied proportions. After mixing, use within the specified pot life.

      Mixing sequence:
      The basis (component A) is mixed with a construction mixer. Then mixed hardener (component B) is added to the basis (component A) and thoroughly mixed with a construction mixer.

      Attention! Careless mixing or incorrect ratio can lead to uneven curing and painting film properties weakening.
      Proportions 100:17 by weight
      4:1 by volume
      Pot life at 20+20С, no less
      8 hours
      Air-free spraying
      Thinning: 0-20%
      Nozzle diameter: 0,011-0,017"
      Initial pressure: 120-180 atm
      Air spraying Operation viscosity: 25-60 s
      Thinning: 10-25%
      Nozzle diameter:1,4-2,5 mm
      Initial pressure: 3,0-4,0 atm
      Cross linking at 200С No less 90 min
      Roller Brush    Can be recommended for small and hard-to-reach areas. Thin the primer depending on the working conditions when using brush.
      Thinner
      Formula thinner  EPPEX 
      Cleaner
      Formula thinner  EPPEX, thinners of type Р4, Р5.
      Finishing
      Tubing, pistol and other spraying tools must be cleaned after using.
      Cleaning
      Wash the tools after using immediately. The frequency of washing depends on the amount of sprayed material, the temperature and the time since the shutdown, including any time lag.
      characteristics
      Paint colour Grey, reddish-brown, other colours - due to customer need, tone isn't specified. Coating colour can differ from base colour (component A) after hardening.
      Density (comp. A), g / cm³ 1,35±0,15
      Density (comp. A+B), g / cm³ 1,27±0,15
      Shine, % Matt
      Adhesion to metals (GOST 15140), not more than 1 point
      Maximum thickness of single-layer coating at viscosity 25 sec 350 µm on wet layer
      Minimum recommended dry film thickness, µm 80
      Maximum recommended dry film thickness, µm 300
      The minimum theoretical flow rate, g/m² 188
      МMaximum theoretical flow rate, g / m² 706
      documentation
      ucwvnfpx2stb2vllj3n8wzrj05vkbrn4
      343 Кб
      Back to list
      PRODUCTS
      ALURON
      Polytex
      EPPEX
      Related materials
      ABOUT COMPANY
      About company
      CEO Message
      Partners
      SalesDepartment: +7 (4932) 773-503
      Ivanovo, 23rd Line str. 13
      Privacy policy
      User agreement
      USE OF SITE MATERIALS IS POSSIBLE ONLY WITH
      THE PERMISSION OF THE ADMINISTRATION inmarketing@gk-rp.ru


      © 2025 All rights reserved LLC "Polimer Export"
      • Home
      • Products
      • EPPEX
      • Primer EPPEX ST
      added compare now
      Cancel Compare now

      We use your browser's cookies. By continuing to use the site, you agree to their use

      Agree