RELEVANT INFORMATION ABOUT THE PRODUCT ALONEIT IN THE SALES DEPARTMENT
The paint is intended for application on concrete floors and meets all requirements for coatings in warehouses and industrial premises:
high abrasion resistance;
resistance to water;
resistance to concentrated sodium chloride solution at +2°C ;
resistance to sudden temperature changes;
excellent adhesion to concrete floor;
elastic and matte surface.
In addition, it is possible to produce paint for concrete floors with the desired properties of viscosity, color, elasticity, etc.
Scope and specifics of application
Before applying the paint mix thoroughly. The base must be strong, clean and dry, free of grease and dust. To strengthen the concrete base and improve adhesion, treat with soil AK-027 "RAUM-PROFIE". On the prepared surface, paint for concrete floors is applied in a single layer with a brush, roller or spray with a marking machine. The thickness of the marking layer of paint shall be not less than 200 microns. It can be diluted with solvent R-4, R-5. Fresh concrete withstand 28 days, remove the cement "milk". Asphalt must be kept at a temperature not lower than +10°C for 7-10 days.
The process of applying
Depending on the type of application and the thickness of the layer material consumption can vary from 300 to 350 g/m2.