Two-component epoxy refinishing compound «MasterPol-012»
DescriptionEpoxy refinishing compound «MasterPol -012» is two-component epoxy compound containing no pigments and hardened by aliphatic amine.
Fields of applicationIt is used as a strengthening, leveling layer for sealing cracks, irregularities and potholes while reparing horizontal surfaces of concrete bases.
Quartz sand must be used as a filler for epoxy repair composition to saturate and increase hardness.Important: the introduction of quartz filler affects the mixture viscosity and spreadability. The required amount of quartz sand is determined experimentally, depending on the specific situation and the required viscosity.
Instruction for useMore detailed information is checked in the technical specification.
ConditionsThe room temperature should be no lower than +100C and no more than + 250C. Too low a temperature slows down the rate of the chemical reaction and worsens spreading, which can lead to an increase in material consumption and coating appearance deterioration. Too high a temperature accelerates the curing reaction, reduces the life of the compound. The relative humidity of the air in the room during the work is not more than 80%.
The process of applying
Component A (base) is mixed in a manufacturer's or special container, then component B (hardener) is added. Next, the components are thoroughly mixed for 2-3 minutes with a construction mixer.
100:29 by weight
2,3:1 by volume
No less 20 min
- two spindle construction mixer
- velvet roller
Formula thinner RP-1K