Enamel Polytex SQ купить у производителя — RAUM-PROFIE
RAUM-PROFIE | Industrial coatings
ABOUT COMPANY
  • About company
  • CEO Message
  • Partners
Products
  • ALURON
  • Polytex
  • EPPEX
  • Related materials
INDUSTRIES
  • Oil and gas sector
  • Capacitive equipment
  • Engineering
  • Protective
  • Chemical industry
  • Transport construction
  • Power Engineering
  • The objects of railway transport
CONTACTS
Ещё
    Задать вопрос
    SalesDepartment: +7 (4932) 773-503
    Callback
    Ivanovo, 23rd Line str. 13
    • Вконтакте
    RU
    0 Sales Department +7 (4932) 773-503
    RAUM-PROFIE | Industrial coatings
    ABOUT COMPANY
    • About company
    • CEO Message
    • Partners
    Products
    • ALURON
    • Polytex
    • EPPEX
    • Related materials
    INDUSTRIES
    • Oil and gas sector
    • Capacitive equipment
    • Engineering
    • Protective
    • Chemical industry
    • Transport construction
    • Power Engineering
    • The objects of railway transport
    CONTACTS
      RAUM-PROFIE | Industrial coatings
      +7 (4932) 773-503
      • ABOUT COMPANY
        • Back
        • ABOUT COMPANY
        • About company
        • CEO Message
        • Partners
      • Products
        • Back
        • Products
        • ALURON
        • Polytex
        • EPPEX
        • Related materials
      • INDUSTRIES
        • Back
        • INDUSTRIES
        • Oil and gas sector
        • Capacitive equipment
        • Engineering
        • Protective
        • Chemical industry
        • Transport construction
        • Power Engineering
        • The objects of railway transport
      • CONTACTS
      • SalesDepartment: +7 (4932) 773-503
      Ivanovo, 23rd Line str. 13

      Enamel Polytex SQ

      Compare

      Polytex SQ enamel is used to paint pre-primed surfaces to form decorative finishing coatings with a different gloss: from deep matt to high gloss (up to 90%).

      more details
      • Enamel Polytex SQ
      • description
      • characteristics
      • documentation
      description

      State Registration Certificate № KG.11.01.09.008.E.000144.02.16 from 24.02.2016.

      Certificate of conformity to requirement documents № POCC РОСС RU Д-RU.РА01.В.02600/23 from 01.02.2023.

      Description

      Two component polyurethane enamel, hardened by aliphatic polyisocyanate.

      Scope and specifics of application

      Polytex SQ enamel is used to paint pre-primed surfaces to form decorative finishing coatings with a different gloss: from deep matt to high gloss (up to 90%).

      It is used for decorative finishing of internal and external surfaces of vehicles: diverse agricultural machines, construction equipment, as well as diverse machine tools and equipment, transport metal structures and metal products that are exposed to  mechanical impacts.

      Polytex S Q enamel has good decorative properties, good adhesion and bending strength.

      Information on the material resistance to various media is available on request.

      Main fields of application: power engineering, mechanical engineering, transport construction.

      Instruction for use

      Two component polyurethane enamel PolytexSQ is applied on primed surface. The surface can be abrasive blasted with grain Р-180 to Р-320.

      Conditions

      Basis temperature higher than dew point no less than 3°C.
      Ambient temperature from  +5°С  to +30°C.
      Relative air humidity  no more 80%.

      The process of applying


      Blending

      Polyurethane enamel consists of two components: component А - basis, component B - hardener. Before use, pre-mix component A with a low-speed drill with mixing nozzle, then mix with component B in stoichiometric ratio in the delivery form. Mix the resulting material thoroughly until smooth. After the hardener is added into the semi-finished product, the material should be allowed to stand for at least 5-10 minutes.

      Proportions 100:5 by weight
      17,5:1 by volume

      Pot life at 200С, no less

      No less 5 hours
      Air-free spraying
      Thinning: 0-10%
      Nozzle diameter: 0,011-0,017"
      Initial pressure: 120 -160 atm
      Air spraying Operational viscosity: 20-40 s
      Thinning: 0-30%
      Nozzle diameter:1,4-2,5 mm
      Initial pressure: 3-4 atm
      Thinner
      Formula thinner  RP-1K,RP-1KF, Polytex.
      Cleaner

      Formula thinner  RP-1K, RP-1KF, thinners of type Р4, Р5.

      Finishing
      Tubing, pistol and other spraying tools must be cleaned after using.
      Cleaning
      Clean straight after using due to painting equipment manual. 

      characteristics
      Paint colour Colour list of RAL
      Density (comp. A), g / cm³ 1,25±0,1
      Density (comp. A+B), g / cm³ 1,24±0,1
      Dry residue by volume (comp. A), % 52±5
      Hardener Polytex ST2
      Adhesion to metals (GOST 15140), not more than 1 point
      Maximum thickness of single-layer coating at viscosity 25 sec 125 microns wet layer
      Drying time to degree 3 at a temperature of (20±2)°C, not more than 4 hours
      Minimum recommended dry film thickness, µm 40
      Maximum recommended dry film thickness, µm 80
      The minimum theoretical flow rate, g/m² 85
      МMaximum theoretical flow rate, g / m² 170
      documentation
      oxbru5sdp3059m6uetlm6jet994knhn7
      353.1 Кб
      Back to list
      PRODUCTS
      ALURON
      Polytex
      EPPEX
      Related materials
      ABOUT COMPANY
      About company
      CEO Message
      Partners
      SalesDepartment: +7 (4932) 773-503
      Ivanovo, 23rd Line str. 13
      Privacy policy
      User agreement
      USE OF SITE MATERIALS IS POSSIBLE ONLY WITH
      THE PERMISSION OF THE ADMINISTRATION inmarketing@gk-rp.ru


      © 2025 All rights reserved LLC "Polimer Export"
      • Home
      • Products
      • Polytex
      • Enamel Polytex SQ
      added compare now
      Cancel Compare now

      We use your browser's cookies. By continuing to use the site, you agree to their use

      Agree