The primer-enamel on metal Polytex MIO
RAUM-PROFIE | Industrial coatings
ABOUT COMPANY
  • About company
  • CEO Message
  • Partners
Products
  • ALURON
  • Polytex
  • EPPEX
  • Related materials
INDUSTRIES
  • Oil and gas sector
  • Capacitive equipment
  • Engineering
  • Protective
  • Chemical industry
  • Transport construction
  • Power Engineering
  • The objects of railway transport
CONTACTS
Ещё
    Задать вопрос
    SalesDepartment: +7 (4932) 773-503
    Callback
    Ivanovo, 23rd Line str. 13
    • Вконтакте
    RU
    0 Sales Department +7 (4932) 773-503
    RAUM-PROFIE | Industrial coatings
    ABOUT COMPANY
    • About company
    • CEO Message
    • Partners
    Products
    • ALURON
    • Polytex
    • EPPEX
    • Related materials
    INDUSTRIES
    • Oil and gas sector
    • Capacitive equipment
    • Engineering
    • Protective
    • Chemical industry
    • Transport construction
    • Power Engineering
    • The objects of railway transport
    CONTACTS
      RAUM-PROFIE | Industrial coatings
      +7 (4932) 773-503
      • ABOUT COMPANY
        • Back
        • ABOUT COMPANY
        • About company
        • CEO Message
        • Partners
      • Products
        • Back
        • Products
        • ALURON
        • Polytex
        • EPPEX
        • Related materials
      • INDUSTRIES
        • Back
        • INDUSTRIES
        • Oil and gas sector
        • Capacitive equipment
        • Engineering
        • Protective
        • Chemical industry
        • Transport construction
        • Power Engineering
        • The objects of railway transport
      • CONTACTS
      • SalesDepartment: +7 (4932) 773-503
      Ivanovo, 23rd Line str. 13

      The primer-enamel on metal Polytex MIO

      Compare

      Polytex MIO enamel primer contains phosphate corrosion inhibitors and iron oxide mica, which form the strongest barrier effect of protecting the metal from the corrosive environment impact during the entire service life. 

      Main fields of application:

      • oil and gas sector;
      • capacitive equipment;
      • transport construction;
      • the objects of railway transport;
      • power engineering.
      more details
      • The primer-enamel on metal Polytex MIO
      • description
      • characteristics
      • documentation
      description
      TU 20.30.22-008-69372620-2021

      Description

      Polyurethane two-component primer-Polytex mio enamel.

      Scope and specifics of application

      Polytex MIO enamel primer contains phosphate corrosion inhibitors and iron oxide mica, which form the strongest barrier effect of protecting the metal from the corrosive environment impact during the entire service life. It significantly increases the operation of the paint coating. Suitable for repair work.

      It is used to paint and provide long-term anti-corrosion protection of concrete, reinforced concrete and metal structures operated in the conditions of industrial atmosphere of moderate, cold and marine climate, including transport infrastructure objects: railway bridges, road bridges, tunnels, ground parts of piles, supports of overpasses, pipelines, road fences, navigation and vehicle control objects, underwater parts of hydraulic facilities and other metal structures and equipment exposed to severe atmospheric corrosion.

      The iron mica contained in the composition forms a tile overlap in the paint layer, i.e. it reinforces the coating, providing effective barrier protection of the metal from atmospheric impact, industrial air, moisture and water.

      Information on the material resistance to various media is available on request.

      Main applications: transport construction, tank equipment, oil and gas industry, power engineering, railway transport facilities. 

      Instruction for use

      Metal surface should be abrasive blasted to grade 1 or 2 to GOST 9.402 (Sa 2,5 or Sa 2 to ISO 8501-1:2007). Clean surface must be free from dust and grease.

      If the quality of surface preparation decreases, the service life and its operating performance may change.

      Conditions

      Ambient temperature from  +5°С  to +30°C.
      Relative air humidity  no more 80%.

      The process of applying

      Blending
      Polyurethane primer-enamel consists of two components: component А - basis, component B - hardener. Before use, pre-mix component A with a low-speed drill with mixing nozzle, then mix with component B in stoichiometric ratio in the delivery form. Mix the resulting material thoroughly until smooth. After the hardener is added into the semi-finished product, the material should be allowed to stand for at least 5-10 minutes.
      Proportions Polytex ST hardener
      100:11 by weight
      7:1 by volume

      Polytex ST2 hardener
      100:8,5 by weight
      10:1 by volume
      Pot life at 200С, no less 5 hours
      Air-free spraying
      Thinning:5-35%
      Nozzle diameter: 0,011-0,017"
      Initial pressure: 120-160 atm
      Air spraying Operational viscosity:25-60 s
      Thinning:10-35%
      Nozzle diameter:1,8-2,5 mm
      Initial pressure: 3,0-4,0 atm
      Cross linking at 200С 1 hour
      Brush, Roller Can be recommended for small and hard-to-reach areas. Thin the primer-enamel depending on the working conditions when using brush. 
      Thinner
      Formula thinner Polytex, Polytex SLOW.
      Cleaner
      Formula thinner Polytex, Р-4.
      Finishing
      Tubing, pistol and other spraying tools must be cleaned after using.
      Cleaning Clean straight after using due to painting equipment manual. 
      characteristics
      Paint colour Grey, colour shade does not specified
      Density (comp. A), g / cm³ 1,4±0,05
      Density (comp. A+B), g / cm³ 1,35±0,05
      Adhesion to metals (GOST 15140), not more than 1 point
      Maximum thickness of single layer coating without dilution 300 µm on wet layer
      Drying time to degree 3 at a temperature of (20±2)°C, not more than 2 hours
      Minimum recommended dry film thickness, µm 60
      Maximum recommended dry film thickness, µm 150
      The minimum theoretical flow rate, g/m² 130
      МMaximum theoretical flow rate, g / m² 339
      Readiness for operation 7 days
      documentation
      3zlvzb7n78n5325tnfr650y8feb01de7
      306.8 Кб
      Back to list
      PRODUCTS
      ALURON
      Polytex
      EPPEX
      Related materials
      ABOUT COMPANY
      About company
      CEO Message
      Partners
      SalesDepartment: +7 (4932) 773-503
      Ivanovo, 23rd Line str. 13
      Privacy policy
      User agreement
      USE OF SITE MATERIALS IS POSSIBLE ONLY WITH
      THE PERMISSION OF THE ADMINISTRATION inmarketing@gk-rp.ru


      © 2025 All rights reserved LLC "Polimer Export"
      • Home
      • Products
      • Polytex
      • The primer-enamel on metal Polytex MIO
      added compare now
      Cancel Compare now

      We use your browser's cookies. By continuing to use the site, you agree to their use

      Agree