Operation of metal, concrete and reinforced concrete structures of chemical enterprises is always accompanied by the impact of aggressive environment. This is the impact of vapors, gases, liquids and solids. In this case, the coating should provide a long term maintenance-free operation while maintaining a decorative appearance throughout the life of the surface.
Materials | Dry film Thickness, µm | Total coating thickness, µm |
Primer EPPEX | 80 | 190-200 |
Enamel Polytex St | 110-120 | |
Primer EPPEX | 200 | 280 |
Enamel Polytex St | 80 | |
Primer EPPEX | 200 | 360 |
Enamel Polytex St | 160 | |
|
||
Primer-enamel Polytex ST | 260 | 260 |
Polyurethane compound | 500 | 500 |
Epoxy compound | 1000 | 1000 |
EPPEX Zn RICH | 100 | 300 |
Primer EPPEX | 100 | |
100 |
||
Primer EPPEX | 80 | 240 |
Enamel Polytex St | 60 |
Reservation
The presented data and recommendations are based on our many years of experience and knowledge, but are not a complete guarantee for each case, because they depend on the quality of the base, the degree of shedding and porosity of the base, methods of processing and application. The information is not exhaustive. Any use of the product for any other purpose not expressly stated herein is at your own risk. The manufacturer is not responsible in this case. The information is subject to changes from time to time due to the continuous improvement of the product.