SERTIFICATE
State Registration Certificate № RU.8.08.09.008.E.000313.10.22 from 04.10.2022.
Declaration of Conformance № РОСС RU Д-RU.PA01.В.36551/22 from 12.10.2022.
Chemical safety data sheet from 14.11.2022
DESCRIPTION
Single component water based acrylic primer.
FIELDS OF APPLICATION
Acrylic water-based primer is designed for priming any wooden surfaces (solid, veneer, plywood), used indoors. Can be applied to MDF surfaces. Primer has high adhesion to the substrate, high coverage and durability. The primer is available as standard in white, tinting is possible if necessary. Does not contain aromatic solvents, does not have a sharp odour.
INSTRUCTION FOR USE
Wood surface must be free of possible contaminants: dust, grease and resin. The wood is then sanded with No. 150 sandpaper manually or with a grinding machine with the required degree of abrasiveness (No. 150). After grinding, the surface is primed. For the primer layer, prime can be thinned with water about 5-10 % if necessary. Use pneumatic spraying or combined application units for priming. An hour after coating the primer layer, the surface must be sanded with sandpaper No. 320 to remove raised pile of wood. In two hours after coating stacking of products is possible.
CONDITIONS
The temperature in the shop when applying the material should be 20-24°C, humidity no more than 80%. To avoid physical damage (cracking, "orange peeling" and loss of gloss) on the coating when applying and drying products avoid drafts.
APPLICATION
| Preparing | Mix thoroughly |
| Automatic painting |
Nozzle diameter: 0,9 mm Initial pressure: 25-45 atm High-pressure spray: 1,0-1,5 atm |
| Air spray |
Nozzle diameter: 1,4-1,8 mm Initial pressure: 4-5 atm |
| Thinner | Water |
| Cleaner | Water |
| Cleaning | Clean the equipment with water after use according to the manual. |