In the oil and gas industry, metal structures are subjected to accelerated corrosion due to the impact of oil, petroleum products, mineralized commercial water, abrasive effects of mechanical impurities, etc. The general condition of the surface also deteriorates difficult climatic conditions, temperature changes, ultraviolet radiation. In this regard, the paint coatings, carrying out the protective function of metal structures in the oil and gas sector, are subject to increased requirements.
We offer anticorrosion systems for protection of metal structures of buildings, overpasses, technological modules, supports of oil and gas pipelines; pipelines (outer surface); metal piles.
|
Materials |
Dry film thickness, µm |
Total coating thickness, µm |
The service life of the coating |
|
120 |
120 |
C3: 15 years |
|
|
|
|
|
|
|
Primer Eppex |
80 |
170 |
C3: 20 years |
|
90 |
|||
|
|
|
|
|
|
40 (80) |
125 |
C3: 19 years’ old |
|
|
85 (80) |
|||
|
|
|
|
|
|
80 |
220 |
C3: 20-25 years |
|
|
80 |
|||
|
60 |
|||
|
|
|
|
|
|
40 |
200 |
C3: 20-25 years |
|
|
60 |
|||
|
|
|
|
|
|
80 |
220 |
C3: 20-25 years |
|
|
80 |
|||
|
60 |
Reservation
The presented data and recommendations are based on our many years of experience and knowledge, but are not a complete guarantee for each case, because they depend on the quality of the base, the degree of shedding and porosity of the base, methods of processing and application. The information is not exhaustive. Any use of the product for any other purpose not expressly stated herein is at your own risk. The manufacturer is not responsible in this case. The information is subject to changes from time to time due to the continuous improvement of the product.